Why use hydraulic quick couplings?
The hydraulic quick connector is a joint that can quickly connect or disconnect the pipeline without tools. It has four main structural forms: straight-through type, single-closed type, double-closed type, and safe and non-leakage type. The materials are mainly carbon steel, stainless steel and brass. The cost of hydraulic quick connectors is higher than that of ordinary hydraulic connectors, but the convenience it brings far exceeds the price difference between them.
Some large-scale construction machinery, such as drilling rigs, large-scale hoisting machines, etc., may have problems with the pipeline at any time under harsh working conditions. At this time, it is necessary to replace the pipeline parts in time. The greater the loss, it is necessary to replace parts quickly to ensure the safe and stable operation of the system. Therefore, in order to achieve this function, the application of hydraulic quick connectors is the best choice.
Generally, there is a large amount of hydraulic oil left in the hydraulic system. If the control is not good during the disassembly process, a large amount of medium oil will leak, which will cause a lot of waste on the one hand, and cause great pollution to the environment on the other hand. Good clean up. Both ends of the hydraulic quick connector are integrated with a one-way valve, so during the disassembly and installation process, there will be no leakage of the medium oil in the system, which plays a good role in guaranteeing the rapid and smooth progress of maintenance.
Large-scale hydraulic systems sometimes require system switching. For example, in the process of section steel rolling, some rack mechanisms need to be overhauled, and the same rack needs to be switched repeatedly. In the switching process, the hydraulic pipeline needs to be disassembled and installed quickly, so as to achieve fast system switching. At this time, the application of quick connectors is the best choice. And in many cases, the system needs to be switched or repaired during operation, which requires pressurized operation. The problem with working under pressure is the need to disassemble the lines and replace parts at hundreds of kilograms of system pressure. The hydraulic quick connector is able to quickly insert and remove the connector under the residual pressure of several hundred kilograms, so as to realize the rapid disassembly and installation of the pipeline.
It can be seen that the hydraulic quick connector can indeed bring us great convenience and speed in the production process. In today's era where time is money, improving production efficiency is the key to success, not just focusing on the cost of original parts.